Hinge-away Counterweight Door

The ARCO Hinge-away Counterweight Door is another type of door that folds up as it opens however the bottom of the door swings outwards which means there is more internal usage space at the door site. Another advantage of this type of door is that it allows a higher drive through which may be an advantage where opening heights are critical. As the hinge-away design has a high bottom leaf this allows for the inclusion of a pedestrian door and as the door swings outward it means the pedestrian door will not fall open. The projection of this door is approximately 1/3rd internal 2/3rd external.

  • Commercial/Industrial/Café’s/Residential
  • Custom built for all structural requirements and architectural designs
  • 1/3rd in / 2/3rd out projection
  • Optional Pedestrian Door Access
  • Extensive range of cladding and glazing materials available
  • Can be fitted with ARCO whisper quiet acoustic/vibration isolation system
  • Motorised or Manual
  • Over 1,000 cycles easily obtained per day
  • ARCO service/maintenance contracts available
  • DEEWR Code Compliant
  • Aust Standards AS1170, AS1250, AS1288, AS1418, AS 2759
Frame Construction:  Duragal R.H.S., Painted R.H.S., Hot Dip Galvanized RHS (Optional) 
Which conform to Aust Standards AS1170, AS1250 
Wind Load 0.5kpa (Standard) any wind load can be computed 
Frame Finish:  Two pack paint, Duragal with silver touch up
Prime coated
Hot Dip Galvanised
Powdercoat
Optional Extras: Arco’s “Cable Sure” fall arrestor system
UPS (Battery Back-up systems)
Acoustic/Vibration Isolation System
Magnetic Locking
Mechanical Locking
Flashing Lights
Buzzers
Control Bollards
Rotating Beacons
Traffic Lights
Strobe Lights
Audible Alarms
Fire Alarm Inputs
Transmitter Controlled
GSM Controlled and Swipe Cards
Cladding & Glazing: There are many cladding options available, including but not limited to the following: 
Glass Doors:
  • Laminated glass, Toughened Glass which conform to Aust Standards AS1288
  • Anodised or Powder-coat Glazing Beads
  • Aluminium Kick Panels
Other Claddings:
  • Bargrill
  • Zincalume or Colorbond Sheeting
  • Perforated Aluminium Sheet
  • Mesh
  • Plywood
  • Timber
  • insulated paneling 
  • & more
 Casings: Folded flat sheet enclosing weights to door height
Ceiling height for showrooms and indoor applications (Optional)
 Seals:  Brush Seals, Rubber Seals or combinations
 Locking:  Manual: Internal lockable Patio/Pad Bolt
Motorised: Magnetic Locking, Locking by motor  
Infill Panels:   Incorporation of pedestrian doors
Side Panels
Overhead Infill to achieve desired headroom 
Motorisation: Single Phase
3 Phase 100% duty cycle with torque limited gearbox & Independent limit switches
Semi commercial single-phase 240V
on board controls
Manual release 
 Controls: In a lockable metal enclosure
PLC Logic Control
Variable Speed Drive
Contactors
Send/Receive or Reflective type photocells
Keypad/Switch operation
Induction loop & detector
RTA interface for Emergency Services
Compatible with most Building Management & Security Systems 

 

                        

Hinge-Away